This handbook shows a new user how to use Binance from the first click to the first Futures trade. Every screenshot was taken on Binance on November 20, 2026, and every example uses real prices from that morning: ETH/USDT near 1,754 on Spot and SOLUSDT near 72.50 on Futures.

Before anything else, register with the Binance referral code SIGNUP2027. It gives you a lifetime 20% commission discount on both Spot and Futures trading fees, and new users can unlock up to $19,800 in welcome bonus rewards. Binance referral code SIGNUP2027 sign-up link

Binance Referral Code SIGNUP2027 at a Glance

  • Referral code: SIGNUP2027

  • Fee discount: 20% on Spot and Futures trading fees, for life

  • New user bonus: up to $19,800 through welcome tasks

  • Sign-up link: https://www.binance.com/join?ref=SIGNUP2027

  • Checked: November 20, 2026

Step 1: Register on Binance with SIGNUP2027

Open the SIGNUP2027 registration page. The top left must say Code: SIGNUP2027. Under it you will see two boxes: "Up to 20% trade rebates" and "Up to $19,800 new user bonus". If you see them, the code is already attached, so you don't need to type it anywhere.

  • Enter your email or phone number.

  • Tick the box to accept the Privacy Notice and click Register.

  • Type the 6-digit code Binance sends you.

  • Create a strong password that you use nowhere else.

Binance registration page with referral code SIGNUP2027, up to 20% trade rebates and up to $19,800 new user bonus
Binance registration page with referral code SIGNUP2027, up to 20% trade rebates and up to $19,800 new user bonus

Step 2: Verify Your Identity

Binance asks for identity verification before you can deposit, trade and withdraw freely. Have your ID card or passport ready, take the photos in good light, and finish the face check in one go. Most accounts are approved within minutes.

Turn on two-factor authentication and set an anti-phishing code right after. Both take two minutes and protect your account from fake emails.

Step 3: How to Deposit USDT on Binance

Go to Wallet, then Deposit, then Deposit Crypto. Pick USDT as the asset, then choose the network. The network must be the same one your sending wallet uses, or the funds can be lost.

  • BSC (BEP20): about 1 minute, 1 confirmation

  • TRX (TRC20): about 1 minute, 1 confirmation

  • ETH (ERC20): about 2 minutes, 6 confirmations

Example: you have 200 USDT on another wallet on BEP20. Choose BSC here, copy the address Binance shows, paste it in the sending wallet, select BEP20 there too, and send. The USDT arrives in your Spot wallet in about a minute.

Binance deposit USDT page: select network BSC BEP20, TRC20 or ERC20 with arrival time and confirmations
Binance deposit USDT page: select network BSC BEP20, TRC20 or ERC20 with arrival time and confirmations

Step 4: Place a Limit Order on Binance Spot

A limit order buys or sells only at the price you choose. Open Trade, then Spot, and search ETH/USDT. In the order panel pick Limit.

Example from the screenshot: ETH was trading at 1,753.64. We set the buy price to 1,740 USDT and the amount to 0.05 ETH. The Total field fills in by itself: 1,740 x 0.05 = 87 USDT. The order waits in the book until ETH drops to 1,740.

Binance Spot limit order example: buy 0.05 ETH at 1,740 USDT, total 87 USDT
Binance Spot limit order example: buy 0.05 ETH at 1,740 USDT, total 87 USDT

Fee math: the Regular user Spot fee is 0.100% (Binance fee page, checked November 20, 2026). On 87 USDT that is 0.087 USDT. With the 20% discount from SIGNUP2027, you pay about 0.0696 USDT. Small on one order, but it adds up over hundreds of trades.

Step 5: Place a Market Order on Binance

A market order fills at once at the best available price. Click Market. The price field shows "Market Price", so you only enter how much you want to spend in USDT (Total) or how much ETH you want to sell (Amount). The minimum is 5 USDT.

Use market orders when speed matters more than the exact price. Use limit orders when you want control over the price.

Binance Spot market order panel: buy with Total in USDT, sell with Amount in ETH, minimum 5 USDT
Binance Spot market order panel: buy with Total in USDT, sell with Amount in ETH, minimum 5 USDT

Step 6: Other Binance Order Types

Open the arrow next to Stop Limit to see the full list: Stop Limit, Stop Market, Trailing Stop, OCO, TWAP and POV. For a beginner, Stop Limit and OCO are the two worth learning first.

Binance Spot order types menu: Stop Limit, Stop Market, Trailing Stop, OCO, TWAP, POV
Binance Spot order types menu: Stop Limit, Stop Market, Trailing Stop, OCO, TWAP, POV

Step 7: How to Set a Stop-Loss on Binance (Stop Limit)

A stop-loss sells your coins if the price falls to a level you pick, so one bad move doesn't turn into a big loss. On Spot you build it with a Stop Limit order on the Sell side.

  • Stop: 1,700. When ETH trades at 1,700, the order wakes up.

  • Price: 1,695. It then places a sell limit at 1,695.

  • Amount: 0.05 ETH. Total: 84.75 USDT.

Keep the limit price a little under the stop price. If the market falls fast through both, a stop limit may not fill; that is the trade-off for price control.

Binance stop-loss example with Stop Limit: stop 1,700, limit 1,695, sell 0.05 ETH, total 84.75 USDT
Binance stop-loss example with Stop Limit: stop 1,700, limit 1,695, sell 0.05 ETH, total 84.75 USDT

Step 8: Transfer USDT from Spot to Futures

Futures uses its own wallet. On the Futures page click the two-arrow icon next to "Avbl". Set From to your Spot account and To to USDⓈ-M Futures, pick USDT, type the amount (100 in our example) and confirm. The transfer is instant and free.

Binance transfer from Spot wallet to USD-M Futures: coin USDT, amount 100
Binance transfer from Spot wallet to USD-M Futures: coin USDT, amount 100

Step 9: How to Change Leverage on Binance Futures

Open SOLUSDT Perpetual. At the top of the order panel you will see Cross and a leverage button. The default here was 20x. Click it and the Adjust Leverage window opens with a slider from 1x to 100x.

For a first trade, type 5 and confirm. Lower leverage means a liquidation price further away from your entry. The window itself warns that higher leverage increases liquidation risk.

Binance Futures Adjust Leverage window: lower leverage from 20x to 5x before opening a position
Binance Futures Adjust Leverage window: lower leverage from 20x to 5x before opening a position

Step 10: Open a Futures Trade with Take Profit and Stop Loss

Pick Limit, set the price, enter the size, and tick TP/SL before you click Buy/Long. Example from the screenshot:

  • Price: 72.52 USDT, size: 100 USDT (about 1.38 SOL)

  • Take Profit: 76, about +4.8%, a gain of about 4.80 USDT

  • Stop Loss: 70, about -3.5%, a loss of about 3.47 USDT

  • At 5x leverage, the margin used is only 20 USDT

Binance Futures SOLUSDT limit order with TP/SL: price 72.52, size 100 USDT, take profit 76, stop loss 70
Binance Futures SOLUSDT limit order with TP/SL: price 72.52, size 100 USDT, take profit 76, stop loss 70

Futures fees for Regular users are 0.0200% maker and 0.0500% taker on USDT pairs (Futures fee page, checked November 20, 2026). Opening this 100 USDT trade as a taker costs 0.05 USDT; with SIGNUP2027 you save 20% of it on every trade.

Step 11: How to Withdraw from Binance

Go to Wallet, then Withdraw. Pick USDT, paste the receiving address, then choose the network. The list shows the fee for each one, and this is where the right choice saves money:

  • BSC (BEP20): fee 0.01 USDT

  • opBNB: fee 0.015 USDT

  • TRX (TRC20): fee 2 USDT

The receiving wallet must support the same network. Send a small test amount first if you are using a new address.

Binance withdraw USDT network list with fees: BSC 0.01 USDT, opBNB 0.015 USDT, TRC20 2 USDT
Binance withdraw USDT network list with fees: BSC 0.01 USDT, opBNB 0.015 USDT, TRC20 2 USDT

How Much SIGNUP2027 Saves You: Two Examples

  • Spot: 10,000 USDT traded in a month x 0.100% = 10 USDT in fees. 20% off saves 2 USDT a month.

  • Futures: 50,000 USDT taker volume x 0.050% = 25 USDT. 20% off saves 5 USDT a month.

  • Because the discount is lifetime, the saving repeats every month you trade.

FAQ: Binance Referral Code SIGNUP2027

What is the Binance referral code for 2027?

Use SIGNUP2027. It gives a lifetime 20% discount on Spot and Futures fees and access to up to $19,800 in new user bonus rewards.

Can I add the code after I register?

Binance allows it only in limited cases. The safe way is to sign up through the link so the code is attached from day one.

What is the safest leverage for beginners?

There is no safe leverage, but low leverage like 2x to 5x with a stop loss keeps the liquidation price far away and the loss small.

Is a stop limit the same as a stop loss?

A stop limit is the order type you use to build a stop loss on Spot. On Futures you can set the stop loss directly with the TP/SL box.

Start with Binance Referral Code SIGNUP2027

Open the SIGNUP2027 sign-up page, check that Code: SIGNUP2027 is shown, and follow the steps above in order. Start small, use a stop loss on every trade, and keep leverage low until you know how Futures moves.

Disclosure: SIGNUP2027 is my referral code, and I may earn commission from qualifying activity. This is an independent guide, not an official Binance post. Rewards depend on Binance's terms, your region and your eligibility. Crypto and Futures trading carry high risk, and leverage can wipe out your margin. Not financial advice. DYOR.

#BinanceReferralCode #SIGNUP2027 #Binance #BİNANCEFUTURES